This tiny ESP8266 development board is a small version of our WiFi deauther projects. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
NOTE:
• The ESP8266 does only support 2.4GHz.
• This development board is designed specially for Spacehuhn's great project: ESP8266 Deauther. It has been authorized by him and officially supported.
Features:
- Only ~80mA power usage
- TP4056+PL5353A battery protection solution
- Included 2dB antenna
- All GPIO breakouts and 3.3 and 5V output
- 2 LEDs to indicate battery charging status (Red:Charging,Green:Full)
- Protection: short, over charging, over discharging, temperature
GPIOs and Hardware info:
- Display: SH1106 1.3" OLED
- Display SDA: GPIO 5 (D1)
- Display SCL/SCK: GPIO 4 (D2)
- WS2812b LED: GPIO 15 (D8)
- Button Up: GPIO 12
- Button Down: GPIO 13
- Button Select: GPIO 14
- High Light LED: GPIO16
- All ESP07 pins break out
What is inside:
- Deauther MiNi x1
- 2db antenna x1
- Female header x2
- Battery connector x1
Disclaimer:
- Only for testing and educational purposes against your own devices.
- Please check the legal regulations for your country to make sure you don't violate any laws.
Reference:
DSTIKE WiFi Deauther MiNi
SKU: 2040004
Volume pricing
This tiny ESP8266 development board is a small version of our WiFi deauther projects. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
NOTE:
• The ESP8266 does only support 2.4GHz.
• This development board is designed specially for Spacehuhn's great project: ESP8266 Deauther. It has been authorized by him and officially supported.
Features:
- Only ~80mA power usage
- TP4056+PL5353A battery protection solution
- Included 2dB antenna
- All GPIO breakouts and 3.3 and 5V output
- 2 LEDs to indicate battery charging status (Red:Charging,Green:Full)
- Protection: short, over charging, over discharging, temperature
GPIOs and Hardware info:
- Display: SH1106 1.3" OLED
- Display SDA: GPIO 5 (D1)
- Display SCL/SCK: GPIO 4 (D2)
- WS2812b LED: GPIO 15 (D8)
- Button Up: GPIO 12
- Button Down: GPIO 13
- Button Select: GPIO 14
- High Light LED: GPIO16
- All ESP07 pins break out
What is inside:
- Deauther MiNi x1
- 2db antenna x1
- Female header x2
- Battery connector x1
Disclaimer:
- Only for testing and educational purposes against your own devices.
- Please check the legal regulations for your country to make sure you don't violate any laws.